Product details
IPX5 6.3mm Hose Nozzle and IPX6 12.5mm Water Jet NozzleThe IPX5 6.3mm Jet Nozzle and IPX6 12.5mm Water Jet Nozzle with pressure gauge is designed according to the requirements of IPX5 and IPX6 code of GB4208 and IEC60529 standard. It's used to test the waterproof performance of the appliance and electronics.
1. Parameters:
Item |
IPX5 |
IPX6 |
Nozzle Hole Diameter |
6.3mm |
12.5mm |
Water Discharge |
12.5L±0.625L/min |
100±5L/min |
Nozzle distance between shell |
2.5-3m |
Test Time |
More than 1min/m2 and 3mins |
Pressure Gauge |
0~0.25Mpa |
2. Picture:3. Pego supplies standard or customized solutions and products for many tests, measurements and quality control tasks required in the field of cable, wire, socket, plug, switch, plastic and rubber testing. All of our products are complying with the requirements of many standards, such as IEC, UL, VDE, VS, JIS, GB and so on.
4. Except the waterproof test chamber, we also provide other lab equipment, such as glow wire tester, needle flame tester, salt spray test chamber, iec test probe, lamp cap gauge, plug and socket gauge, withstanding voltage tester, insulation resistance tester, spectrometer, integrating sphere, black test corner, spring hammer, esd gun, surge genrator etc.
If you're interested in our product, please contact me immediately. Thanks.